Discovery Optics 3 Piece Scope Levelling Calibrating Kit
The Discovery Optics scope levelling kit is the perfect little tool and an essential to have in your kit to ensure that your rifle scope is perfectly flat to your rail.
The kit comes in three pieces - a small wedge and two adjusters. These adjusters come in two different sizes so that all spaces between rail and scope can be adjusted from just a few mm up to 19.5mm
the small mount piece sits on your rail securely to accomodate either of the two wedges. You then slide the wedge into the small guide on the mount until it presses up against the underside of your scope, allowing you to adjust the orientation of your scope until it is completely flat, then simply screw the rings back tightly and remove the wedges and you're all set to go!
Mount / Rail Piece
- Inset length - 28mm
- Overall length - 33mm
- Width: 20mm
- Inset Height: 4mm
- Overall Height: 9mm
Small Wedge
- Length: 72mm
- Height at Tallest Point: 15mm
- Height at Smallest Point: 2mm
- Thickness: 6mm
Large Wedge
- Length: 72mm
- Height at Tallest Point: 24mm
- Height at Smallest Point: 10mm
- Thickness: 6mm
- Discovery Optics 3 Piece Scope Levelling Calibrating Kit