Hawke Match Mounts
Hawke Match 1"/25mm 1 PIECE - HIGH Rifle Scope Mount Ring - 9-11mm Airgun Rimfire base - 22105
Hawke Match Rifle Scope 1 PIECE Mount Ring - 1" ring HIGH 3/8" 9-11mm airgun/rimfire dovetail base - Hawke model number 22105
Precision engineered from high grade aluminium with rounded edges prevent scope damage.
Please read fitting carefully. Mount returns due to choosing the wrong size are WAY too common and cost us both - and are so easily avoidable! If unsure please ask....
Summary - 1 Piece - 1" - 25mm tube - 9-11mm dovetail base fit (airgun and rimfire type) - HIGH profile height with 22mm saddle to best suit 40-60mm lens scopes.
- Double hex screws to hold your scope firmly in place
- Recoil stop pin
- Reversible dove tail clamp that fits 9-11mm and 3/8 inch airgun and rimfire bases
- Internal cushion tape prevents marking and damage
- High grade aluminium anodised in matte black
- Base: Fits 9-11mm width dovetail bases commonly found on airguns and rimfire. See http://www.tacticalscope.co.uk/blog/?p=50 if unsure how to determine what you have.
- Ring Diameter: 1 inch - 25mm tube scope
- Saddle Height: HIGH - Distance from base of mount to bottom of ring (the saddle) is 22mm (0.86")
Scope Lens size suitability - based on scope being fitted onto a flat base rail and scope lens objective being flush to the gun body
- Maximum outer scope case size = 69mm (22mm + 12.5mm ring radius x2)
- This equates to an approx. maximum scope lens size of 60mm as most scope outsides add around 7-12mm.
- Can add more if flip up lens caps are being used so please take this into consideration.
- However if the end of the scope will hang over the gun barrel or if the rail is raised then larger lens scopes can be accommodated.
- Configuration: 1 Piece
- Ring Size (Diameter): 1″ / 25.4mm
- Height: High
- Rail: 9-11mm
- Fixings (Rail & Top Cap): Double Hex Screw
- Internal Cushion: Yes
- Retractable 'Recoil Stop' Pin: Yes
- Height: 51mm / 2"
- Weight: 167g / 5.9oz