Airmax 30 SF Scopes
Hawke Airmax 30 6-24x50 SF AMX IR Mil Dot Rifle scope + flip up Caps, big Sidewheel and sunshade 133
Hawke Airmax 30 6-24x50 Side Focus parallax, Red Illuminated etched glass AMX Mil Dot Rifle scope + Metal screw in flip up lens Caps, 100mm Sidewheel and 100mm Sunshade
The Hawke Airmax 30 SF family of scopes are designed for serious airgunners. Equally suitable for long and short range Airgun hunting and Airgun Target shooting they are also rated for use on any caliber.
Outside United Kingdom buyers please READ - There are special UK export rules for sales of telescopic scopes of 10x or more maximum magnification. You are very welcome to buy but we might have to get an export permit before the product can be shipped. Please read this page BEFORE buying (opens in new window)
Hawke Airmax 30 6-24x50 SF Rifle Scope. Featuring side focus and the new AMX reticle, true at 10x and with stepless infinitely adjustable red illumination suited for target and hunting applications.
>>> Exceptional AMX airgun fully floating Mil Dot reticle (Glass Etched)
>>> Supplied with metal screw in flip up lens caps, 100mm screw in sunshade and 100mm sidewheel
Mounts to fit it onto a rifle ARE NOT included
See mount rings section of shop for rings. Requires 30mm diameter rings high profile. Be sure to choose the correct base i.e., 9-13mm airgun or 20mm weaver/picatinny. Other base types, normally manufacturer proprietary or drilled/tapped we do not supply.
Quick fire bullet features
- 16 layer fully multi-coated optics for exceptional clarity
- Side focus control for parallax adjustment to 10 yards to infinity
- 30mm mono-tube chassis for superior strength
- Stepless rheostat offers total brightness control
- ¼ MOA exposed, locking and re-settable turrets
- Fast focus eyebell and high torque zoom ring
- RRP - £309.99
Etched Glass AMX Mil dot
Half Mil Dot spacing on the lower vertical post provides increased aim points when compensating for long shots. Additional bars calculated at 1/2, 1, 1 1/2 and 2 Mil spacing compensate for cross winds. The outer posts are divided into Mil spacing making them perfect for bracketing and range finding.
Etched also means it is indestructible under any normal circumstances. Recoil will never knock it off and it eliminates internal light reflection from the use of IR. Such reflection can be a side effect with non etched wire reticles.
Benefits of Glass Etched Reticles and Illumination
Glass-etched reticles are way superior to wire for several reasons, most notable is how much more crisp, fine and clean your view is when you look thorough the scope.
A glass etched reticle, also cannot be broken. Anyone who has shot enough has seen a wire reticle actually break within the reticle field. As the reticle design is etched into the reticle lens, it is static and cannot physically be broken.
All Hawke scopes that are illuminated use the superior glass-etched reticles which as the added benefit of zero internal light reflection which occurs to some extent in illuminated scopes with wire reticles.
This superior design requires an additional cost, but even if you don’t plan to use the illumination, the glass-etched reticle is a feature with value to the shooter.
Illuminated Reticle (IR)
Ideal for low light or very bright light. In such conditions targets and background can appear dark or be in shadow. When this happens seeing your aim point on the reticle can be very difficult. The solution - turn on the IR to get instant contrast. You can adjust the brightness to suit conditions and find perfect contrast.
Included are two metal flipup covers to protect the lenses when not in use. Each cover has a key for attaching it to the rifle scope.
The sunshade can be attached to the rifle scope by screwing it into the objective thread. Multiple sunshades can be combined to create a larger sunshade.
Easy fast turret adjustment
Locking resettable turrets make adjustments easy and repeatable, even when used with gloved hands.
Side focus parallax adjustment, with a range of 10 yards to infinity.
Parallax is the term that describes the difference in angles between objects that are seen up close and those seen far away. When you look at telephone poles pass by on the side of the road, those closest to your car seem to pass very fast, while the ones far away seem to go very slow. That difference is due to parallax.
The reticle in your scope is like a telephone pole that's very close. If you move your head on the stock while watching the target through the scope, it's probably possible to see the reticle move against the target. That affects where you perceive the aim point to be, and that affects your accuracy.
Parallax focus reduces this phenomenon to the greatest extent possible.
- This enables you to be parallax free and in focus at all target distances.
- The 100mm wheel can be used to give finer operation. It does not need to be used and can be taken off and put on as required.
Technical Details and Summary
- Chassis: 30mm Mono-tube
- Optical System: 6-24×
- Objective: 50mm
- Reticle: AMX IR
- Illumination: Red stepless
- Focus/Parallax: Side Focus - 9m / 10yds to Infinity
- Field of View: m @100m / ft @100yds - 5.8 - 1.5m / 17.3 - 4.5ft
- Eye relief: 102mm / 4"
- Length: 395mm / 15.6"
- Weight: 757g / 26.7oz
All calibre rated.
- Material: Magnesium Alloy
- Exit Pupil: 8 - 2mm / 0.3 - 0.1"
- Ocular Type: Fast Focus
- Lens Coating: Fully Multi-Coated - 16 Layers
- Power Selector Style: Rubber Coated Posi-Grip
- Warranty: Hawke Worldwide Warranty
- Elevation and Windage Adjustment Range: 65 MOA
- Increment: ¼ MOA
- Turret Caps: NA
- Turret Type: Exposed
- 4" (100mm) Side Wheel
- 4" (100mm) Screw-in Sunshade
- Metal flip up covers
- Lens Cloth
- CR2032 Battery
- Tools and instruction booklet
Free Hawke BRC Software download
The perfect reticle setup is simple with the free Hawke Ballistic Reticle Calculator. It can calculate all calibre rifles. Now includes slug and crossbow bolt settings.
Ballistics can be a complicated business at the best of times, which is why Hawke have developed easy-to-use and deadly accurate reticles with the added support of the patented Ballistic Reticle Calculator.
The BRC is quick to download and navigate around. The calculations produce accurate results that translate into extreme accuracy and precision when you’re in the field.
With BRC you can:
- Browse a list of preset aim points suitable for your own calibre
- Choose a preferred reticle for your shooting calibre and requirements
- Adjust the presets to work either in metric or imperial measurements
- Change zero distances, muzzle velocity, magnification & Estimated Deterioration/Ballistic Coefficient value (ED/BC)
- Plot your rifle trajectory and find aim points
- Carry out advanced range finding calculations
Get BRC at
Mac - visit www.hawkeoptics.com
PC - visit www.hawkeoptics.com
iPhone - search ‘HawkeBRC’ in the App Store
|Length||395mm / 15.6"|