Account login:
Your cart:
0 item(s) in your cart
Total: £0.00

Hawke Match Mounts

Hawke Match 1 inch 25mm LOW Airgun 9-11mm and 3/8" Base Scope Mount Rings HM6102

£19.95
For 1" (25mm) scope tubes for fitting on airgun dovetail 9-11mm and 3/8" base. ideal for upto 38mm lens scopes
You will earn 19 loyalty points with this purchase

Hawke Match 1 inch 25mm LOW Airgun 9-11mm and 3/8" Base Scope Mount Rings HM6102

For 1" (25mm) scope tubes for fitting on airgun dovetail 9-11mm and 3/8" base. 

Match Mounts feature a stylish ribbed top cap that is also fastened by double screws on each side. During manufacture all the sharp edges are rounded to prevent the accidental pinching of the riflescope tube.

A stylish scope mounting solution. Enhances the look of your favourite rifle and scope.

Key Features:

  • For 1 inch - 25mm Tube
  • Reversible dovetail clamp: 3/8" or 9-11mm Rail
  • Double hex screws on top for super grip
  • Retractable 'Recoil Stop' Pin
  • Internal cushion tape (prevents scope damage)
  • Low profile
    • 12.5mm saddle = max outer objective case diameter of 48mm
    • Typically this means they will suit upto 38mm lens scopes - depending on outer case width and lens caps in use etc
    • If in doubt check outer casing diameter of the scope. If it is over 48mm you will need to go up to medium profile mounts or use a riser.



Additional Features:

  • Rounded edges prevent scope damage
  • Precision engineered from high grade aluminium
  • Anodized Matt Black

The modern spring powered air rifle can deliver high levels of muzzle velocity in countries where the law permits. High powered air rifles deliver a punishing recoil which can shake a riflescope out of zero if the scope mounts are not designed to withstand that recoil.

Spring airguns create double recoil requiring a well designed mounting system. Hawke Match Mounts feature cushion tape to prevent damage to the riflescope tube.

The double hex screws and precision machined dovetail clamp rail fit snugly onto the rifle dovetail. The dovetail clamp rail is reversible to fit both 9-11mm (airgun) and 3/8" rimfire rifle receivers.

The mounts feature a stylish ribbed top cap that is also fastened by double screws on each side. During manufacture all the sharp edges are rounded to prevent the accidental pinching of the riflescope tube.

A stylish scope mounting solution. Enhances the look of your favourite rifle and scope.

Own this product? Write a review.
Brand Hawke
Code NW959
Weight 0.12kg
MPN HM6102