Flexible Payment options with Klarna, LayBuy and Paypal

Hawke Match Mounts

Hawke Match 1 inch LOW Weaver-Picatinny Mounts

Hawke Match 1 inch LOW Weaver-Picatinny Mounts

£20.95 £17.46 (ex. VAT)
Stock Status: In Stock
Model 22112 For 1" (25mm) scope tubes for fitting on 20mm weaver/picatinny base. Ideal for smaller objective lens scopes
You Will Earn 20 points with this purchase

Make 6 weekly payments of £3.49.

Interest free. Learn More

PayPal Checkout

Hawke Match 1 inch 25mm LOW profile Weaver-Picatinny 20mm Base Rifle Scope Mount Rings - 22112

For 1" (25mm) scope tubes for fitting on 20mm weaver/picatinny base. 

Match Mounts feature a stylish ribbed top cap that is also fastened by double screws on each side. During manufacture all the sharp edges are rounded to prevent the accidental pinching of the riflescope tube.

A stylish scope mounting solution. Enhances the look of your favourite rifle and scope.

Key Features:

  • For 1 inch - 25mm Tube
  • For fitting on a 20mm weaver/picatinny base rail.
  • Double hex screws on top for super grip
  • Internal cushion tape (prevents scope damage)
  • Low profile
    • 6mm from bottom of mount to ring and 12.7mm total from lowest point of clamp to bottom of mount ring
    • See clearance guide below

Calculating scope to rifle body clearance

The way you calculate the clearance is by halving the overall OUTSIDE diameter of your rifle scopes objective lens and then deducting half the rifle scopes body tube diameter.

For scopes with a 1" diameter body tube diameter this would mean deducting 12.7mm and 15mm for scopes with a 30mm diameter body tube.

Note we say OUTSIDE diameter - this means NOT the lens diameter, you need to measure the whole outer casing diameter.

The result gives you the minimum "saddle" dimension - the measure from base of mount to bottom of the ring.

The amount the saddle dimension is greater than the figure you have calculated is the amount of clearance your scopes objective will be clear of your rifles body. 

Example -

  1. A scope has an outer case measurement of 38mm.
  2. 38 divided by 2 = 19.
  3. 1" scope so deduct 12.7mm = 6.3mm
  4. So the mount must have a saddle measure (base of mount to bottom of the ring) greater than 6.3mm or else it will ground out on the rifle body.

Clearance depends on whether it is a short or long base rail i.e., is the scope objective over the base rail itself or beyond it.

Note some rifles with high or adjustable cheek pieces may require higher scope mounts or risers so that your eye is in line with the rifle scope and your head is kept in an upright comfortable position.

Additional Features:

  • Rounded edges prevent scope damage
  • Precision engineered from high grade aluminium
  • Anodized Matt Black
  • MPN:
  • EAN:
  • Brand:
  • Product Code:
  • Weight:
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review