Is it in stock? If you can add it to cart, yes, in stock. Out of stock cannot be ordered
Free UK Shipping on all orders over £50
Flexible Payment options with Klarna & LayBuy
Need help? Fast Reply Email or call us: 0843 5328462

Hawke Match Mounts

Hawke Match 30mm MEDIUM Airgun 9-11mm and 3/8" Base Scope Mount Rings HM6160 - 22107

Hawke Match 30mm MEDIUM Airgun 9-11mm and 3/8" Base Scope Mount Rings HM6160 - 22107

£22.95 £19.13 (ex. VAT)
Stock Status: In Stock
For 30mm scope tubes for fitting on airgun dovetail 9-11mm and 3/8" base. Ideal upto 40mm lens scopes
You Will Earn 22 points with this purchase

Make 6 weekly payments of £3.83.

Interest free. Learn More

Hawke Match 30mm MEDIUM Airgun 9-11.5mm and 3/8" Base Scope Mount Rings HM6160 - 22107

 For 30mm scope tubes for fitting on airgun dovetail 9-11.5mm and 3/8" base. 

Match Mounts feature a stylish ribbed top cap that is also fastened by double screws on each side. During manufacture all the sharp edges are rounded to prevent the accidental pinching of the riflescope tube.

A stylish scope mounting solution. Enhances the look of your favourite rifle and scope.

Key Features:

  • For 30mm Tube
  • Reversible dovetail clamp: 3/8" or 9-11.5mm Rail
  • Double hex screws on top for super grip
  • Retractable 'Recoil Stop' Pin
  • Internal cushion tape (prevents scope damage)
  • Low profile
    • 11mm saddle = max outer objective case diameter of 52mm
    • Typically this means they will suit upto 40mm lens scopes - depending on outer case width and lens caps in use etc
    • If in doubt check outer casing diameter of the scope. If it is over 52mm you will need to go up to high profile mounts or use a riser.

Additional Features:

  • Anodized Matt Black
  • Precision engineered from high grade aluminium
  • Rounded edges prevent scope damage 

Calculating scope to rifle body clearance

The way you calculate the clearance is by halving the overall OUTSIDE diameter of your rifle scopes objective lens and then deducting half the rifle scopes body tube diameter.

For scopes with a 30mm diameter body tube this means deducting 15mm.

Note we say OUTSIDE diameter - this means NOT the lens diameter, you need to measure the whole outer casing diameter.

The result gives you the minimum "saddle" dimension - the measure from base of mount to bottom of the ring - 11mm in this case

The amount the saddle dimension is greater than the figure you have calculated is the amount of clearance your scopes objective will be clear of your rifles body. 

Example -

  1. A scope has an outer case measurement of 52mm (scopes with 40-44mm lenses tend to be in this area of outer case size)
  2. 52 divided by 2 = 26.
  3. 30mm scope so deduct 15mm = 11mm
  4. So the mount must have a saddle measure (base of mount to bottom of the ring) greater than 11mm or else it will ground out on the rifle body. So this mount with 11mm will be too short, it needs to be more than 11mm.

Calculating your rifle scopes clearance in this way does assume your dovetail or base is not raised above or below your rifles barrel. Note some rifles with high or adjustable cheek pieces may require higher scope mounts or risers so that your eye is in line with the rifle scope and your head is kept in an upright comfortable position.


 
  • MPN:
    22107
  • EAN:
    5054492221073
  • Brand:
    Hawke
  • Product Code:
    NW960
  • Weight:
    0.12kg
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product