Leapers UTG Claw Mount base with 14 Picatinny slots for use on Remington 870 12ga and compatible Shotguns - Leapers product code MNT-RM870A
UTG Picatinny Top Base Rail Mount for Remington 870 12 Ga. and compatible Shotguns.
7.5" (190mm) long with 19 weaver/picatinny top base slots for fitting scopes, dot sights and rear sights
Precision machined from aircraft grade aluminum with matte black hard coat anodize
Low profile see thru and V-cut on top design allows use of iron sights and front sight beads such as an Easyhit when scope or dot sights not fitted.
Two locking bolts included for replacing the original trigger pins
- Material: Aluminum
- Weight: 5.5oz (154g)
- Rail Type: Fit Remington 870 Shotgun 12 Ga. and Compatibles to give 14 slot Picatinny/Weaver base top
- Pieces: 1
- Length: 7.5 inch (190mm)
- Width: 1.9 inch (48m)
- Height: 2.6 inch (66mm)
The Picatinny base rail - what is it and how does if differ from a weaver base rail
Also known as a MIL-STD-1913 rail, Standardization Agreement 2324 rail, or tactical rail, is a bracket on some firearms that provides a standard mounting platform for accessories and attachments, similar to the Weaver rail mount.
The rail consists of a series of ridges with a T-shaped cross-section interspersed with flat "spacing slots." Accessories are mounted either by sliding them on from one end or the other; by means of a Picatinny/Weaver mount which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots between the raised sections.
The Picatinny locking slot width is 0.206 in (5.23 mm). The spacing of slot centers is 0.394 in (10.01 mm) and the slot depth is 0.118 in (3.00 mm).
The only differences between the Picatinny rail and the similar Weaver rail are the size of these slots and the fact that they are standardized. Weaver rails have a slot width of 0.180 in (4.57 mm), but are not necessarily consistent in the spacing of slot centers.
Some accessories are designed to fit on both Weaver and Picatinny rails; but most Picatinny devices will not fit on older Weaver rails. As of May 2012, however, most mounting rails are cut to Picatinny standards, and many accessories come with the recoil pin cut to the Weaver-compatible diameter. Many rail-mounted accessories come with only a single recoil pin, avoiding the issue of differing slot spacing. See https://en.wikipedia.org/wiki/Picatinny_rail for the full article
About Leapers - http://leapers.com/company_info.php and http://leapers.com/faq.php
No reviews have been left for this product, be the first to leave a review