Account login:
Your cart:
0 item(s) in your cart
Total: £0.00

Quick Detach QD Mount Rings

Leapers UTG Twist Lock - 6 screw High Profile - 25mm/1" tube Weaver/Picatinny mount rings - RG2W1206

£19.95
Suit upto 56mm lens scopes with 1" tube on weaver/picatinny base.
You will earn 19 loyalty points with this purchase

Leapers UTG Twist Lock rifle scope mounts - 6 screw super strong - High Profile - for 25mm/1" tubes fitting on to Weaver/Picatinny base rails - RG2W1206

Sale is for 2 - a pair - of mounts

Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero

See Clearance guide below to learn how to accurately assess if they will fit and if they do how much space you will have between scope lens and rifle base/body

Fitting basics:

  • Fit on to 20mm width weaver/picatinny base - See http://www.tacticalscope.co.uk/blog/?p=50 if unsure how to determine what you have.
  • 1" (25mm) tube scope
  • High profile - For objective lens upto 56mm diameter (20mm from base to bottom of ring)

Features

  • 6-screw medium profile "dragon" ring = Super stong and recoil proof
  • Machined from aircraft aluminum alloy for maximum strength with Mil spec Type III class 2 hardcoat anodizing for scratch and wear resistance
Twist lock design for quick and easy installation - Spring loaded tensioned thumb nut twist lock for Quick Detach and fitting.
  • Light weight with see-through tunnel and slot cut on ring top
  • High quality synthetic protective tape on rings inner surface to protect your kit
  • Strong recoil stop cross bolt for optimized fit and zero


Wear Resistance
Mil spec Type III class 2 hardcoat anodizing for scratch and wear resistance


Calculating scope to rifle body clearance

The way you calculate the clearance is by halving the overall OUTSIDE diameter of your rifle scopes objective lens and then deducting half the rifle scopes body tube diameter.

For scopes with a 1" diameter body tube diameter this would mean deducting 12.7mm and 15mm for scopes with a 30mm diameter body tube.

Note we say OUTSIDE diameter - this means NOT the lens diameter, you need to measure the whole outer casing diameter.

The result gives you the minimum "saddle" dimension - the measure from base of mount to bottom of the ring - the 'C' dimension of 20mm that is shown above.

The amount the saddle dimension is greater than the figure you have calculated is the amount of clearance your scopes objective will be clear of your rifles body. 

Example -

  1. An example scope has an outer case measurement of 51mm.
  2. 51 divided by 2 = 25.5.
  3. 1" scope so deduct 12.7mm = 12.8mm
  4. So the mount must have a saddle measure (base of mount to bottom of the ring) greater than 12.8mm or else it will ground out on the rifle body.

Calculating your rifle scopes clearance in this way does assume your dovetail or base is not raised above or below your rifles barrel. Note some rifles with high or adjustable cheek pieces may require higher scope mounts or risers so that your eye is in line with the rifle scope and your head is kept in an upright comfortable position.

About Leapers - see www.leapers.com for more information and if you see products on there you would like contact me to ask if we can order them in for you.

Leapers, Inc., headquartered in Michigan, U.S.A., has been in the business of supplying shooting, hunting and outdoor gear since 1991. The Accushot, UTG and 5th Gen ranges of scopes and mounts are finding an ever greater following in both the USA and Europe due to an ever increasing reputation for great quality as well as very reasonable prices.

The scope ranges I sell at Nickwake are all of the True Strength platform which is tested on the most demanding air rifle AND firearms and can take repeated very heavy recoil shock both Back AND Front.

The mounts range from top quality air rifle to LE and military grade.

Leapers do manufacture some products in the USA but most are still made in China yet to a very exacting and precise USA quality standard and all products are shipped to the US for checking and onward sale or export. So you can be sure that what you are getting is top quality and essentially "made in USA" quality and carry a lifetime warranty for manufacturing quality.

Do beware of cheap copies though, the China/Far east direct sales market is full of cheap copies, that, credit to them, look very good but are not made to the same quality standard and do not have any warranty. As a rule, if the Leapers product you are looking at is too cheap to be true then it is probably IS to cheap to be true - so be wary. 

Own this product? Write a review.
Brand Leapers UTG
Code NW1029
Weight 0.21kg
MPN RG2W1206
EAN 4712274527546