Bases and Mounts For Specific Rifle Models
Nikko 1 piece Picatinny adapter scope rail Base for Short Action Howa 1500, Weatherby Vanguard - Blued
165.6mm long with 16 slots. Approx. 10mm high
Supplied with allen key and 4 screws
High grade alloy manufacture by Nikko Stirling
Measurements - in mm
- A) 6.7
- B) 15.2
- C) 98.8
- D) 21.9
- E) 23.0
This is the silver version, the item for sale here is the blued one as per main picture at the top
The Picatinny rail
The rail consists of a series of ridges with a T-shaped cross-section interspersed with flat "spacing slots." Accessories are mounted either by sliding them on from one end or the other; by means of a Weaver mount which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots between the raised sections.
The Picatinny locking slot width is 0.206 in (5.23 mm). The spacing of slot centers is 0.394 in (10.01 mm) and the slot depth is 0.118 in (3.00 mm).
The only differences between the Picatinny rail and the similar Weaver rail are the size of these slots and the fact that they are standardized. Weaver rails have a slot width of 0.180 in (4.57 mm), but are not necessarily consistent in the spacing of slot centers.
Some accessories are designed to fit on both Weaver and Picatinny rails; but most Picatinny devices will not fit on Weaver rails. As of May 2012, however, most mounting rails are cut to Picatinny standards, and many accessories come with the recoil pin cut to the Weaver-compatible diameter. Many rail-mounted accessories come with only a single recoil pin, avoiding the issue of differing slot spacing.
Easy to mount and a perfect fit
Easy to mount and a perfect fit at very good price"