Account login:
Your cart:
0 item(s) in your cart
Total: £0.00

Bases and Mounts For Specific Rifle Models

Nikko 1pc Picatinny Base Rail - Long Action Howa 1500, Weatherby Vanguard and like 1500 bases - Silver

£22.95
For long action Howa 1500 and same bases, eg. Weatherby Vanguards, S&W 1500, Mossberg 1500 and Interarms 1500
You will earn 22 loyalty points with this purchase

Nikko Stirling 1 piece Picatinny Base Rail adapter - for Long Action Howa 1500, Weatherby Vanguard and same base S&W 1500, Mossberg 1500 and Interarms 1500 rifles - Silver alloy finish

Mil standard 1913 tactical Picatinny base rail suitable for fitting on LONG ACTION Howa 1500, Weatherby Vanguard and same base S&W 1500, Mossberg 1500 and Interarms 1500 rifles.

Gives you a 1913 picatinny base (20mm width) on the rifle for mounting of picatinny and weaver scope mount rings and accessories such as tactical torches, lasers, bubble levels, angle mounts etc.
  • 178mm long with 17 slots
  • Supplied with allen keys and fitting screws
     
  • Silver alloy finish

High grade alloy manufacture by Nikko Stirling

Measurements - in mm
a) 6.7
b) 15.7
c) 114
d) 21.9
e) 19.4



The Picatinny base rail - what is it and how does if differ from a weaver base rail

Also known as a MIL-STD-1913 rail, Standardization Agreement 2324 rail, or tactical rail, is a bracket on some firearms that provides a standard mounting platform for accessories and attachments, similar to the Weaver rail mount.

The rail consists of a series of ridges with a T-shaped cross-section interspersed with flat "spacing slots." Accessories are mounted either by sliding them on from one end or the other; by means of a Weaver mount which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots between the raised sections.

The Picatinny locking slot width is 0.206 in (5.23 mm). The spacing of slot centers is 0.394 in (10.01 mm) and the slot depth is 0.118 in (3.00 mm).

The only differences between the Picatinny rail and the similar Weaver rail are the size of these slots and the fact that they are standardized. Weaver rails have a slot width of 0.180 in (4.57 mm), but are not necessarily consistent in the spacing of slot centers.

Some accessories are designed to fit on both Weaver and Picatinny rails; but most Picatinny devices will not fit on Weaver rails. As of May 2012, however, most mounting rails are cut to Picatinny standards, and many accessories come with the recoil pin cut to the Weaver-compatible diameter. Many rail-mounted accessories come with only a single recoil pin, avoiding the issue of differing slot spacing
. See https://en.wikipedia.org/wiki/Picatinny_rail for the full article

Own this product? Write a review.
Brand Nikko Stirling
Code NW1076
Weight 0.09kg
MPN NM15503
EAN 9420008945621