Nikko Match Mounts Mk2
Nikko Match Mk2 Scope Mount Rings 30mm ring LOW 9-11mm Airgun/Rimfire NSMM3038L
Nikko Match Mk2 Rifle Scope Mount Rings - 30mm ring, LOW height profile, 9-11mm Airgun/Rimfire dovetail bases - Nikko Model code NSMM3038L
Sale is for 2 - a pair - of mounts
Made of highest grade aluminium with matte black finishing and designed for all categories of rifles.
Four screws hold the upper part of the ring to the base which gives additional strength and ruggedness.
Recoil stop to minimize the impact of recoil.
Please read fitting carefully. Mount returns due to choosing the wrong size are WAY too common - cost us both - and are so easily avoidable! If unsure please ask....
Summary - 30mm tube - 9-11mm dovetail base fit (airgun and rimfire type) - LOW profile height with 8.8mm saddle to best suit upto approx. 36mm lens scopes.
- Double hex screws to hold your scope firmly in place
- Recoil stop pin
- Reversible dove tail clamp that fits 9-11mm and 3/8 inch airgun and rimfire bases
- Internal cushion tape prevents marking and damage
- High grade aluminium anodised in matte black
- Base: Fits 9-11mm width dovetail bases commonly found on airguns and rimfire. See http://www.tacticalscope.co.uk/blog/?p=50 if unsure how to determine what you have.
- Ring Diameter: 30mm tube scope
- Height: Low - Distance from base of mount to bottom of ring (the saddle) is 8.8mm (0.34")
Scope Lens size suitability - based on scope being fitted onto a flat base rail and scope lens objective being flush to the gun body
- Maximum outer scope case size = 47.6mm (8.8mm saddle + 15mm ring radius = 23.8 - x2)
- This equates to an approx. maximum scope lens size of 34-38mm as most scope outsides add around 7-12mm.
- Can be more than 7-12mm if flip up lens caps are being used so please take this into consideration.
- However if the end of the scope will hang over the gun barrel or if the rail is raised then larger lens scopes can be accommodated.
- Configuration: 2 Piece
- Ring Size (Diameter): 30mm
- Height: Low
- Rail: 9-11mm (3/8"-11mm)
- Fixings (Rail & Top Cap): Double Hex Screw
- Internal Cushion: Yes
- Retractable 'Recoil Stop' Pin: Yes