Is it in stock? If you can add it to cart, yes, in stock. Out of stock cannot be ordered
Free UK Shipping on all orders over £50
Flexible Payment options with Klarna & LayBuy
Need help? Fast Reply Email or call us: 0843 5328462

PAO

PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP

PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP
PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP
PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP
PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP
PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP

PAO 5-20x50 FFP Side Parallax Illuminated Half Mil Dot Rifle Telescopic scope - Best Deal FFP

£254.95 £212.46 (ex. VAT)
Stock Status: Sold Out
1/4 MOA Clicks. First Focal Plane, SF Parallax, Illuminated, Etched Glass Half Mil Dot, Integral Anti Cant Bubble level, Large Sidewheel, Sunshade, Flip up Caps, 9-11mm Mounts
You Will Earn 254 points with this purchase
Sorry, this item is out of stock

Make 6 weekly payments of £42.49.

Interest free. Learn More

Our best value FFP by far - And really good too - Review - See https://www.youtube.com/watch?reload=9&v=CqLkDCYka-U review starts at 22.56

5-20x zoom magnification range
Easy adjust rear magnification ring

50mm diameter, fully-coated objective lens
Large clear crisp view of the target and surroundings

 
Length: Scope only 395mm - with sunshade 469mm and with caps on sunshade, 484mm


Half MIL-dot reticle in first focal plane - Etched Glass
Ever popular and versatile designed around the milliradian standard, and is graduated with half MIL-dot spacings to assist with holdover/holdunder when aiming at ranges other than the scope’s primary zero distance.

The advantage of the FFP crosshair is that the relationship between the target and the MIL-dot spacings will remain constant, regardless of what magnification the scope has been set to

Glass-etched reticles are superior to wire for several reasons, most notable is how much more crisp, fine and clean your view is when you look thorough the scope.

A glass etched reticle, also cannot be broken. Anyone who has shot enough has seen a wire reticle actually break within the reticle field. As the reticle design is etched into the reticle lens, it is static and cannot physically be broken.

All illuminated scopes with glass-etched reticles have the added benefit of zero internal light reflection which occurs to some extent in illuminated scopes with wire reticles.

 

Red or green crosshair illumination
The crosshair can be illuminated in red or green and be cycled through 7 levels of intensity - Or off for plain black.

Illumination comes into its own when shooting targets that are either naturally dark or made dark by light conditions such as shadow, dawn dusk, very bright light or night shooting with lamps or night vision kit.

Without Illumination a black reticle can be very hard to make out against the target. Illumination fixes this problem and gives immediate contrast. Adjust intensity according to the light conditions.


Push-button rheostat - seven brightness settings
Press the button marked ‘R’ to light the reticle in red. Press the button marked ‘G’ to light the reticle in green . Each subsequent press of the button will increase the reticle brightness and can be cycled through no illumination to maximum intensity.



Simultaneously pressing both the ‘R’ and ‘G’ buttons will revert to a black reticle (no illumination) and store the last setting. The next time either the ‘R’ or ‘G’ button is pressed, the reticle will illuminate at its last used intensity.



Integral anti-cant spirit level bubble
The F1 features an integral anti-cant bubble to avoid canting – leaning the rifle to one side when on aim. Slacken the bolts on the mounts’ top straps so that the scope can be rotated within the rings. It is important that you ensure the rifle itself is perfectly perpendicular (see image below) before you undertake the procedure for aligning the reticle’s vertical and horizontal stadia. Once the scope’s anti-cant bubble is centred, re-tighten the strap bolts.



Side parallax adjustment (PA) - 10 yards to infinity
The target’s focus and sharpness is further refined by turning the PA sidewheel. This eliminates parallax error, but also serves as a handy range-finding system

Simply turn the sidewheel back and forth until the target becomes sharp, and then read off the range shown. This is best achieved at the highest power (20x) and can be used in conjunction with the reticle bracketing system. It is also useful when bracketing is not possible (eg when the target size is not known).


Advanced Push-LOK™ adjustment turrets (1/4 MOA)

The scope’s Push-LOK top and side adjustment turrets can be locked to avoid them inadvertently turning. To unlock them to make adjustments, pull the turret outwards.

After adjustment, push the turret inwards to lock it again. The Push-LOK elevation and windage turrets offer very precise 1/4 MOA (minute-of-angle) click adjustments. One click will move the POI approximately one inch at 100 yards (metric equivalent of approximately 7mm at 100 metres).

At 25 yards, 1 click equates to roughly 1/16 inch adjustment (or approximately 2mm at 25 metres).


Fast-focus eye-piece
The crosshair sharpness is set at the eyepiece (dioptre adjustment) easily adjusted as needed.


30mm aviation grade aluminium alloy body tube

Full accessory set
  • 9/11mm two-piece ring mounts - Suit the majority of air rifles and rimfire rifles.
  • Opaque flip-up protective lens covers
  • Screw-on 75mm sunshade
  • Large Sidewheel
Shock, water, fog and dust proof

Nitrogen purged

Rated for all firearms

Lifetime warranty
  • Length:
    395mm / 15.6″
  • Click value:
    1/4 MOA
  • Brand:
    PAO
  • Product Code:
    NW1907
  • Weight:
    1.3kg
Write an online review and share your thoughts with other shoppers!
Be the first to review this product