PARD NV008 Digital Night Vision Day Rifle Scope Handheld Spotter 200m NV range
The PARD NV008 Digital Vision Rifle Scope has been designed as a night / day rifle scope combo unit and offers the user excellent performance out to 200 meters with its on board IR illuminator.
If paired with a higher grade IR / Laser illuminator performance would be 250 meters depending on external conditions.
Smart, Compact and light-weighted with ergonomic design
IP67 waterproof-rated protection ensures no problems in wet weather
Easy to use and operate, especially for a new beginner
Day light & Night-time mode, can be used anytime even in complete darkness
Picatinny side rail, you can add illuminator or laser according to your needs.
Outside United Kingdom buyers please READ - There are special UK export rules for sales of telescopic scopes of 10x or more maximum magnification. You are very welcome to buy but we might have to get an export permit before the product can be shipped. Please read this page BEFORE buying (opens in new window)
- Magnification 6.5x-12x
- Angle of view-Horizental 40°
- Continuous digital Zoom 1x/2x
- Frame rate: 30fps
- Photo resolution 2592*1944
- Video resolution: 1920*1080
- Eyepiece resolution: 800*600
- Transmission Method WiFi
- Focusing Range 3 m to Infinity
- Exit Pupil: 8mm
- Eye relief: 35mm
- Diopter Adjustment +5 to -5 dpt
- IR power 5W
- Laser Beam 1mw
- Storage type: TF Card (not included)
- Video output: .AVI
- Battery 3.7V, 18650 lithium battery rechargeable - NOT INCLUDED
- Operating Temperature: -25 to …50 °C
- Storage Temperature -50 to … 60 °C
- Dimension 162*54*69mm
- Weight 450g
Ease of use - Zeroing - zero video at https://youtu.be/X0nxRTX8DcE
Simply fire a shot at the target, go into the zeroing menu and, while keeping the scope reticle on your aiming point, press the OK key. First pressing the + or – key freezes the display so that any subsequent moving of the rifle has no effect on the image seen on the display
Pressing the + and – keys moves the reticle against the frozen display image until the reticle is horizontally aligned with the point of impact.
Press the OK key and it then becomes possible to adjust the vertical position of the reticle using the up and down keys (the image is still frozen)
When the vertical position has been adjusted to the point of impact, the reticle should now be at the point of impact.
Pressing OK again unfreezes the display and, if necessary, the style and colour of the reticle can be changed.
Fire a second shot to check that the POA and POI are aligned, and if not close enough, repeat the procedure.
|Length||162mm by 54x69|