Account login:
Your cart:
0 item(s) in your cart
Total: £0.00

Sportsmatch

Sportsmatch AOP55 1" 1 Piece Adjustable Mount Ring (9.5-11.5mm Rail) High 60mm lens

£46.95
Out of stock
1" - 25mm tube - 3/8" 9.5-11.mm dovetail base fit - High height with 27mm base to scope saddle measure. Suits upto approx 60mm lens scopes.
You will earn 46 loyalty points with this purchase
Sorry, this item is out of stock

Sportsmatch AOP55 1" 1 Piece Adjustable Mount Ring (9.5-11.5mm Rail) High 60mm lens

Adjustable for windage and elevation - Maximum amount of adjustment from one end of the mount to the other is 2mm (windage & elevation) Very useful if your scope is running out of elevation!

Locking screws include a anti vibration coating. Suits up to 60mm lens diameter on most rifles.


Please read fitting carefully. Mount returns due to choosing the wrong size are WAY too common - cost us both - and are so easily avoidable! If unsure please ask....

Summary - 1" - 25mm tube - 3/8" 9.5-11.mm dovetail base fit - High height with 26.5mm base to scope saddle measure. Suits upto approx 60mm lens scopes.

Fitting basics

  • Base: Fits 3/8" 9.5-11.5mm dovetail airgun and rimfire type bases. See http://www.tacticalscope.co.uk/blog/?p=50 if unsure how to determine what you have.
  • Ring Diameter: 1 inch - 25mm tube scope
  • Height: High - Distance from base of mount to bottom of ring (the saddle) is 26.5mm

Scope Lens size suitability - upto approx. 60mm lens

Key Features:

  • Windage & Elevation Adjustments - upto 65 MOA vertical adjustment
  • Double screws
  • Scope lens up to 60mm
  • Retractable Recoil Pin
  • 1" Scope Tube
  • Reversible dovetail clamp: 9.5 -11.5mm Rail
 

A - 26.5mm

B - 110mm

C - 4.5mm

Weight - 196g

Calculating scope to rifle body clearance

The way you calculate the clearance is by halving the overall OUTSIDE diameter of your rifle scopes objective lens and then deducting half the rifle scopes body tube diameter.

For scopes with a 1 inch diameter body tube this means deducting 12.5mm.

Note we say OUTSIDE diameter - this means NOT the lens diameter, you need to measure the whole outer casing diameter.

The result gives you the minimum "saddle" dimension required - the measure from base of mount to bottom of the ring - the 'A' dimension that is shown above.

The amount the saddle dimension is greater than the figure you have calculated is the amount of clearance your scopes objective will be clear of your rifles body.  The saddle on these mounts is -

Worked Example -

  1. A scope has an outer case measurement of 51mm.
  2. 51 divided by 2 = 25.5.
  3. 29 minus 12.5 = 12.8mm
  4. So the mount must have a saddle measure (base of mount to bottom of the ring) greater than 12.8mm or else it will ground out on the rifle body.

Keep in mind that flip up lens caps may add 2mm or so.

Calculating your rifle scopes clearance assumes that:

  • Your dovetail or base is not raised above or below your rifles barrel
  • Some rifles with grooved receivers such as some models of airgun and .22 rimfire will mean the scope sits lower
  • A raised dovetail base or Weaver/Picatinny base may add height

Note some rifles with high or adjustable cheek pieces may require higher scope mounts or risers so that your eye is in line with the rifle scope and your head is kept in an upright comfortable position.

Own this product? Write a review.
Brand Sportsmatch
Code NW1086
Weight 0.21kg
MPN AOP55