MAIN MENU
FinanceKLARNA AVAILABLEOn All Products!
Reviews5 STAR REVIEWS99% 5* Trustpilot Reviews
GuaranteeEXCHANGE GUARANTEE90 day scope out guarantee
DeliveryFAST DISPATCHFast delivery on in-stock items
Price MatchMAKE AN OFFERName Your Price eBay style!
Cantilever

Cantilever

7 results
Sort By sort-descending
Athlon Armor 34mm 20 MOA Cantilever Picatinny/Weaver Scope Mount
£169.95
available
1 in stock
Hawke 2" Extension 30mm 2 Piece Weaver Cantilever Scope Rings - High
£33.99 Was £38.00
available
2 in stock
Hawke Tactical AR Cantilever Mount 30mm 1pc Weaver - High
£85.99 Was £95.00
available
1 in stock
Spuhr Cantilever Interface Rings 34mm - H30/1.18''
£219.95 Was £231.95
available
Currently Out Of Stock
Spuhr ISMS SP-4024C 34mm H48mm 0MIL PIC Gen3 Scope Mount
£349.99
available
Currently Out Of Stock
Vector Optics 30mm Adjustable Cantilever Weaver Rifle Scope Rings
£39.95
available
1 in stock
sportsmatch_hop77
£97.99
available
2 in stock

You've viewed 7 of 7 products

What are Cantilever Rifle Scope mounts?

A rifle scope cantilever mount is a 1 piece design, where the mount "cantilevers" forward over the barrel. This design pushes the scope further forward, creating more room for adjusting eye relief.

Cantilever mounts are often used on flat top AR-platform rifles where the rail space is limited, and you need to move the scope further out to achieve the correct eye relief. They are especially useful for mounting scopes with longer tubes.

They are available in mostly in picatinny rail though there are a few dovetails from the likes of BKL

The 1 piece cantilever is as opposed to Extended mounts which are generally 2 piece but for the same purpose.

Typically choice between Extended and Cantilever is the same as choosing between 1 and 2 piece mounts.

There is some crossover in products in category, just an admin thing! Extended = 2 piece. Cantilever = an extended 1 piece mount.

Why and why do you use a Cantilever rifle scope mount?

A cantilever scope mount is for when you want to move the scope further forward more than a standard mount would allow. It may be possible to reverse for a backward position but screws/levers on the base may interfere if used this way as the main design is for forward positioning.

Use reasons may be to adjust eye relief, which is the distance from your eye to the ocular lens of the scope that allows for a full field of view.

Or it may also be because you need the scope to clear an obstruction such as a magazine or allow for cocking bolt operation.

Such situations can arise on rifles where the rail is shorter, or where the scope’s design requires extra forward positioning, foe example, with a Scout scope where forward position is normally needed

READ MORE