A base adapter you fit on standard 3/8"rifle and 11mm width airgun bases to make it into a 20mm weaver base so you can use weaver mount rings

Corrects barrel droop issues on RWS Diana Break Barrel air rifles with T06 2011 and after trigger

Riser for 3/8" (9mm) - 11mm dovetail rails. Adds 0.68" / 17.mm height

Adds 0.68" (17mm) height. For 9-11mm and 3/8" rails

Gives you a 17mm rise on top of your dovetails with side dovetails for accessory mounting

14mm Dovetail to Picatinny Adaptor and Riser Mount. Rails such as BSA Maxigrip/Lightning, Beeman P1, HWs' Haenel Model 303 .22.

Length 100mm with 42mm clamp length. Height add 17.5mm with height 13mm base to underside of base

Length 100mm. Total height addition 17.5mm. Port clearance height 13mm

Note - may not fit 1 piece true mil spec picatinny mounts as the slot spacing is not mil spec. Fine for any 2 piece mount though.

BKL620 - Attaches to BKL 1 and 2 piece mount rings

Bubble level that attaches to 1" (25mm) tube scope tubes.

BKL610 - Attaches to 30mm tube scope tubes.

30 MOA - 120mm long. For Riser heights see pictures towards page bottom. Designed to slide over existing weaver and picatinny bases

Fits 1416/1516/1517/M64 - rear and forward reach that is ideal for Night Vision use Includes Vibra Tite threadlocker

183mm long. Reversible forward and rear

For 3/8" dovetail editions. Does NOT fit 11mm dovetail models. 11mm use CZ455 adapter instead.

For 3/8" dovetail editions. Does NOT fit 11mm dovetail models. 11mm use CZ455 adapter instead. 134mm long

Model 1-0018

0 MOA. 184mm long ideal for Night vision applications

Regular length (133mm) for scopes and red dots where forward or rear reach for NV not required.

0 MOA 157mm long

Ideal for night vision use

0 MOA 159mm long

For short action Howa. 149mm long. MOA elevation

149mm, with Vibra Tite threadlocker

Big 30 MOA, ideal for PRL. Includes Vibra Tite threadlocker

Also fits Bergara Rifles

Also fits Mauser M18. 0 MOA model 2-0004

Model 2-0006 For Rem 700 Long Action & Mauser M18. 20 MOA version

0 MOA Also fits Bergara Rifles. Model 2-0001

189mm long

0 MOA - 170mm long. Centerfire models only - Not Rimfire

0 MOA 149mm long. Rimfire .17 HMR or .22 LR (NOT for WSM/WMR - For those get the Hornet model

Takes into account the height difference of the M77 base

For Ruger M77 Hornet .17 WSM and .22 WMR *NOT HMR or LR*

Sako 75 Action I and 85 Action XS - for calibres .222 and .223

Sako 75 Action I and 85 Action XS - for calibres .222 and .223

For calibres .22-250, .243, .260 Rem, .308 Win, 6.5 Creedmore, 7mm-08 Rem

For calibres .22-250, .243, .260 Rem, .308 Win, 6.5 Creedmore, 7mm-08 Rem

138mm long - 0 MOA

Model 1-0020 0 MOA

For left hand T1X

Model 1-0022 0 MOA extended idal for night vision use

Model 1-0021 20 MOA

Model 1-0027 30 MOA

Superbly engineered 11mm to true mil spec picatinny adapter for air rifles and rimfire. 148mm long, mount base 56mm

Premium grade engineering produces one of the best 11mm to Mil spec picatinny base adapters on the market for rimfire and air rifles. 188m length with 115mm mounting length

0 MOA - 149mm long. For height see pictures bottom of page. Designed to slide over existing weaver and picatinny bases

Forward ext base. 184mm length. Suits all HW100 model variants

Perfect fit on Weihrauch HW60/HW66 .22lr .17hmr .22 Hornet dovetail rails. Model 1-0014 0 MOA

Converts 3/8" dovetail to 20mm weaver base + Adjust upto 40 MOA and 11mm height riser

Converts 11mm and 3/8" dovetail to 20mm weaver base + 11mm height riser

Turn any 3/8" base into a weaver 20mm width. Not for 11mm dovetail or true mil spec picatinny spec crossbars

Converts 3/8" dovetail to 20mm weaver base + 40 MOA and 11mm height riser

Converts 3/8" and 11mm dovetail to 20mm weaver base + 11mm height riser and extended rail top

Hawke 1 piece Adapter 3/8" & 11m dovetail to Weaver/Picatinny Base & 11mm riser with Extended top rail - HM17015 / 22401

Puts a single 155mm - 6.1 inch long weaver and Picatinny standard base (20mm width) onto 3/8" rifle dovetails and 11mm airgun rails.

• For 3/8" and 11mm bases.
• Gives weaver and picatinny top base.
• It is one piece so not suitable for rifles that have a gap between receivers for magazines or bolt actions
• 13 weaver/picatinny slots.
• 11mm riser base. MOA = 0
• 6.1" - 155mm mm long.
• Weight 3.3oz - 93g
• Colour: Black matte
• Material: Aluminium alloy
• Hawke model code: HM17015 / 22401

Attaches to any 20mm weaver-picatinny base to ensure bore and reticle alignment at a glance. Hawke code HM1006

13mm rise 127mm long

Pair - Superb and simple snap in adapter bases that let you use weaver/picatinny mounts on rifle 9mm-3/8" and 11mm dovetail bases

A great way to add a torch or laser to your set up

140mm long, 14mm high with very useful 20 MOA to help with lack of elevation. Is a picatinny to picatinny, not a dovetail adapter

Cantilever dovetail to weaver-picatinny adapter that also acts as a 14mm riser

Solution for attaching picatinny accessories onto M-LOK bases

Solution for attaching picatinny accessories onto M-LOK bases

Suits 10/22 - all variants. Made in USA Pro version

Also fits Bergara Rifles. For SHORT action. If unsure google search your model to establish action type.

1" (25mm) high riser. 1.6" (40mm) long - Slim wodth, see through and very lightweight

1" (25.4mm) High, 5.5" (140mm) long with 13 weaver/picatinny slots for fitting on weaver/picatinny bases. May not fit older weaver bases due to slot width and spacing mismatch

13 slot weaver/picatinny base riser (not base adapter)

Handy little 3 slot weaver and picatinny 0.5" / 12.5mm high riser base

140mm long picatinny riser base giving 19mm (0.75") height rise. See notes, fits all picatinny bases but may not fit older weaver bases.

For LONG action Howa 1500 and same bases, eg. Weatherby Vanguards, S&W 1500, Mossberg 1500 and Interarms 1500

Sold as a single block when is a highly effective scope creep stopper or used in pairs, 13mm riser

Converts a 15mm dovetail to 11mm and accept the wider ranges of 11mm base mount rings

Easy fast way to put weaver picatinny mounts and red dot sights onto 11mm dovetails. Note will not work on rounded 3/8" top