UTG Accu-Sync QR 34mm 2X-High Profile Picatinny Scope Mount Rings
- Precision CNC Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
- Significant Lightening Cuts Massively Reduce Weight Without Compromising Durability
- Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
- Quick Release (QR) Mount Features Tool-free Tension Adjustment, QD Locking Quick Release Levers, and Squared Recoil Stops for a Secure Zero Hold and Return to Zero
- 32mm Saddle Height, 49mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 98mm
- NOTE:Â We recommend to tighten the ring top screws with a torque value of 25 inch-lb.
When standard rings don’t cut it—go extra-high, fast-mount, and full tactical.
Built for serious elevation, these 34 mm quick-detach rings are ideal when you need your optic positioned well above the rail. Whether it's for helmeted shooting, stacked optics, or clearing chunky rail setups, the UTG Accu‑Sync QR rings give you fast detachment and secure, repeatable lock-up with no shift.
With a 49 mm base-to-centre height, they provide more than enough space for even the largest objective scopes—often chosen not because of the scope size, but because your setup demands a raised line of sight.
The UTG Accu-Sync 34mm 2X-high Profile Rings are precision CNC machined from 6061-T6 aluminium and finished in matte black anodization.
These rings feature significant lightning cuts for reduced weight without compromising durability.
Radiused edges prevent snagging, while the Quick Release (QR) mount offers tool-free tension adjustment, QD locking quick release levers, and squared recoil stops for a secure zero hold and return to zero.
Common Use Cases for Extra-High Rings
-
Helmet / Face Shield Use – lifts optic to match line of sight with gear
-
Bullpup & Tactical Platforms – helps with cheek weld and eye alignment
-
Tall Handguards / Rail Clearance – clears lasers, lights, or raised optics bridges
-
Dual-Optic Mounting – run red dots on top or thermal add-ons underneath
-
Benchrest or Bagged Shooting – improved head position behind taller stocks
- SADDLE HEIGHT (MM)22
- NO. OF PIECES 2
- MATERIALS 6061-T6 Aluminum
- QUICK-DETACHABLE Yes
- MOUNT TYPE Picatinny
- HEIGHT PROFILE 2X-High
- OPTIC TO MOUNT TORQUE VALUE (IN-LB) 25
- SCOPE OUTER OBJECTIVE DIA (MAX) (MM/IN) 98 mm
- Precision CNC Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
- Significant Lightening Cuts Massively Reduce Weight Without Compromising Durability
- Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
- Quick Release (QR) Mount Features Tool-free Tension Adjustment, QD Locking Quick Release Levers, and Squared Recoil Stops for a Secure Zero Hold and Return to Zero
- 32mm Saddle Height, 49mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 98mm
- NOTE: We recommend to tighten the ring top screws with a torque value of 25 inch-lb.
- M4 Socket Head T15 Torx Head Screw
- T15 Torx Wrench
- Allen Wrench 3mm
- User Manual
Q1: Will these clear any size scope?
Yes — with 49 mm base-to-centre, they offer 98 mm total scope clearance diameter. That means even oversized scopes with 70–80 mm objective bell diameters will clear easily on a flat rail. But clearance isn’t the main reason to choose these…
Q2: Why use rings this tall?
Extra-high mounts are often about shooter setup, not just scope fit. These are ideal if you:
-
Need a higher head position
-
Use face masks, night vision, or goggles
-
Want to co-witness or stack a red dot on top of a scope
-
Have raised accessories or rails that lower mounts won’t clear
Q3: Do these fit Picatinny or Weaver?
Designed specifically for Picatinny (MIL-STD 1913).
The integrated crossbar recoil stop engages directly with Picatinny rail slots. They may fit Weaver rails if the cross-slot width allows, but not guaranteed.
Q4: Do they hold zero when removed and replaced?
Yes – the quick-release mechanism is designed to return to zero when clamped consistently to the same rail position. Ideal for rifles that share optics.
Q5: Is there a torque limit on the cap screws?
Yes. Tighten evenly from 18 to a maximum of 25 in-lbs
Over-tightening can damage the scope tube or disturb zero. if scope is thin tube, max at 18
Q6: Will these feel too tall for regular scopes?
Possibly — unless your setup needs the extra height. If you’re not using bulky gear, stacking optics, or shooting from high platforms, you might prefer a lower mount.
Lifetime
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.