Hawke Tactical 34mm Weaver/Picatinny Rifle Scope Mount Rings - Medium
Hawke’s Medium Tactical Match mounts strike the right balance—just enough lift to clear mid-to-large objective bells, with a solid hold that stays true under recoil.
Built for 20 mm Picatinny and Weaver rails, with a 32 mm base-to-centre height, they’re ideal for scopes with wider front ends upto approx 64mm outer diameter when fited in a flat base and objective bell is directly over the base.
- Triple Torx Screws Hold Your Scope Firmly In Place
- Internal Cushion Prevents Marking & Damage
- Matte Black Anodised High Grade Aluminium
Q1: What size objective bell will these fit without touching the rifle?
With a 32 mm centre height, your scope’s outer objective radius must be under 32 mm for safe clearance.
Example:
-
A 64 mm outer diameter = 32 mm radius → ✅ Will just clear
-
A 65 mm OD = 32.5 mm radius → ❌ Will likely touch unless using a raised rail
Always measure the outer casing – not just the lens. Adjustable Objective (AO) scopes especially may be 6–10 mm wider than their lens spec.
Q2: Are these Picatinny or Weaver rings?
They are compatible with both.
-
Base width = 20 mm
-
The integrated crossbar slots into the rail grooves, providing strong anti-recoil hold
✅ Fits Picatinny (MIL-STD 1913) and Weaver rail formats
⚠️ Some Picatinny-only rings may not fit older Weaver rails, but these Hawke rings will fit either
Q3: Is there a stop pin included?
No – and none is needed.
The crossbar underneath the ring base acts as the recoil stop by locking into the slots on your Weaver or Picatinny rail.
Q4: What torque should I use on the top screws?
Maximum recommended torque is 18 lbs/ft (≈2.5 Nm).
Over-tightening can deform the scope tube or cause zero shift. Use a torque driver for best results and even clamping.
Q5: Suitable for airguns and centrefire?
Yes. As long as your rail is Weaver or Picatinny, these mounts are excellent for airguns, rimfires, or full-bore rifles, especially with larger scopes that need a bit more lift.
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.