Spuhr ISMS SP-3026C Gen 3 30mm High (32mm) 0 MIL Picatinny Mount
"The Noveske Shooting Team mount"
The Noveske Shooting Team Mount was developed on special request from the Noveske Shooting Team to give them extra advantage in 3gun competitions.
Most flat top style cantilever mounts are 1,5" (38mm) high, which provides a nice good cheek weld. The SP-3026 is 1,26" (32mm high) and gives a much tighter cheek weld than most other flat top mounts on the market, making fast and instinctive shooting much easier and faster.
As the SP-3026 is designed for speed shooting in 3gun and IPSC-style rifle competitions and therefore does not have the bubble level most other Spuhr mounts have. Allows the scope to be mounted 70 mm/2.76” farther forward than with a non-cantilever mount.
10-degree wedge included.
- 0 MIL/0 MOA
- Height: 32 mm/1.26”
- Length: 140 mm/5.51”
- Weight: 223 g/7.9 oz
- Clearance: 8 mm
Note: Will not fit the SAKO S20 or rifles with 2-piece rails
Ideal Scope Mount System
Extremely sturdy scope mount, with possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides unobstructed view of the knobs.
Durability
Prevents damage on scope due to flexing during heavy recoil or rough handling. The snipers rifle and the spotter’s carbine can have the same mount, enabling the use of the same or shared equipment and accessories.
Scope rotation
Innovative solution for indexing the rotation of the scope, using the included tool/gauge to index the scope correctly to the mount and gun. This is very important since if the scope is not properly indexed there will be an unintended lateral shift of the point of impact whenever the elevation is adjusted.
Mounting placements
Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend you don ́t want the sights to be mounted on the forend. Our mounting system have up to seven interfaces for accessories, and the laser can easily be attached to the scope mount, providing the advantage of undisturbed laser and having the weight close to the centre of the gun instead of forward.
Tilt
Mounts can be delivered in various tilts. The tilt is clearly engraved on the mount, in both MIL and MOA.
Accessible and readable dials
The rings are cut at 45 degrees instead of horizontaly, providing several advantages; the screws holding the parts together are not obscuring the knobs, thus the shooter can quickly determine the settings of the knobs.It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side.
The rings have index marks on the top and right side, making low knobs more easily readable.
Accessories
Provides use of various accessories such as angle cosine indicator (ACI), back up sights, lasers, illuminators, night vision mounts etc. with a minimized ”footprint”. With traditional mounts this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The ”Ideal Scope Mount System”™ have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications.
Level
The sight mount have a level included in the rear of the mount.
- Spuhr ISMS SP-3026C Gen 3 30mm High (32mm) 0 MIL Picatinny Mount.
- 10-degree wedge included.
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.