UTG Max Strength 22mm Wide 1" Low 2 Piece Picatinny Scope Mount Rings
- 4-screw "tiger" Ring.
- Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
- Twist-Lock Design for Quick and User-Friendly Easy Installation.
- Light Weight With See-through Tunnel and Slot Cut on Ring Top.
- High-Quality Synthetic Protective Tape on Rings' Inner surface to protect your Equipment.
- Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails.
- Strong Recoil Stop Cross Bolt for Optimized Fit and Zero.
Looking for solid, no‑nonsense rings that hold up under recoil while staying sleek?
These UTG “Max Strength” low profile rings are built for shooters who want strength and minimal height. With quick‑twist lock design, protective inner tape and strong locking hardware, your scope will stay firmly put without adding bulk.
- 4-screw "tiger" Ring.
- Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
- Twist-Lock Design for Quick and User-Friendly Easy Installation.
- Light Weight With See-through Tunnel and Slot Cut on Ring Top.
- High-Quality Synthetic Protective Tape on Rings' Inner surface to protect your Equipment.
- Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails.
- Strong Recoil Stop Cross Bolt for Optimized Fit and Zero.
- Material: Steel/Aluminium
- Weight: 2.0 oz
- Rail Type: Picatinny/Weaver
- Profile Level: Low
- Ring Diameter: 1 inch
- Ring Width: 18mm
- Max. Scope Outer Objective Diameter: 45mm
- Screws Per Ring: 4
- A: 1 inch
- B: 18mm
- C: 10mm
- 4-screw "tiger" Ring.
- Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
- Twist-Lock Design for Quick and User-Friendly Easy Installation.
- Light Weight With See-through Tunnel and Slot Cut on Ring Top.
- High-Quality Synthetic Protective Tape on Rings' Inner surface to protect your Equipment.
- Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails.
- Strong Recoil Stop Cross Bolt for Optimized Fit and Zero.
- UTG Max Strength 22mm Wide 1" Low 2 Piece Picatinny Rings.
Q1: What size objectives will these rings fit without touching the rifle?
These rings have a centre height of roughly 23‑24 mm. Measure the outer casing of your objective bell (divide its outer diameter by 2 = radius). If that radius is under 23‑24 mm, the scope will clear the rifle on a flat rail. Always go by the outer housing size, not just lens size—AO scopes often have much larger outer cases.
Q2: Will they scratch my scope’s tube?
No—these rings include synthetic protective tape inside. It helps prevent scratches and wear against the scope tube, especially when you torque the screws down.
Q3: How secure are they under recoil?
Quite secure. The steel locking plate and recoil stop cross bolt help maintain zero. If mounted tightly and correctly, they stay solid even with heavier calibres.
Q4: Is the twist lock design reliable for repeated mounting/unmounting?
Yes. The twist lock is designed for easy on/off while keeping alignment strong. For best protection, re‑check torque after re‑mounting to ensure screws stay firm
Q5: Are these suitable for air rifles or rimfire platforms?
Yes—these rings are a good match for air rifles or rimfires that use 1″ tubes and Picatinny rails. Their low profile helps keep eye relief manageable and maintain cheek weld without adding unnecessary height.
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.
Download QD Reference Table HERE
