UTG PRO 34mm High 2 Piece P.O.l Picatinny Rings

• High Profile P.O.I (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective.

The innovative Precision Optics Interface (P.O.I) Addresses 3 of the Most Critical Areas in Scope Rings:

• Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube.
• Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold.
•  Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of forwarding and Aft Movement from Recoil Vibrations.

Other features include:

• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width.
• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms.
• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize.
• UTG PRO Original Snag-free Contoured Profile with Reduced Weight and Size.