Hawke Precision 34mm Low Quick-Release Scope Mount Rings – Weaver & Picatinny
Steel 34 mm scope mount rings with tool-free quick removal
- Quick release lever
- Double torx screws to hold your scope firmly in place
- Designed for Weaver Picatinny rail fitting
- Solid steel construction for superior strength
Hawke Precision 34 mm 2-Piece Low Quick-Release Weaver & Picatinny Scope Mount Rings are robust, precision-engineered mounts designed to securely attach 34 mm tube scopes to Weaver or Picatinny rails.
Built from rugged steel with low-profile quick-release clamps, this two-piece set provides a stable, continuous platform that keeps your optic aligned and close to the bore line for a natural cheek weld on many rifles, while still allowing you to remove and replace the scope quickly without tools.
Are Low profile right for you?
The low profile is beneficial when you want to keep your optical centre close to the bore, but as with all mount choices, it’s best to think in actual measurements rather than “low, medium or high” labels, as these are relative terms that vary between brands and product ranges.
Key height factor
What matters most is your scope’s outer objective diameter and how it related to the ring height in millimetres (base-to-bottom or base-to-centre), together with whether your rail/base is flat or raised
These measurements tell you how high the scope will sit above the base and whether you’ll have enough clearance without mounting the scope unnecessarily high or so low that it touches the barrel or guard (very bad = returns)
For example, a “40 mm scope” refers to the lens diameter, not the outer housing. The outer housing is typically ~45–54 mm depending on whether the scope has an adjustable objective (AO) housing.
On a flat rail/base, the combination of rail height and ring height must give enough clearance for the objective housing. Checking your rail height and ring height in mm helps avoid relying on “low / medium / high” labels, which are not standardised across brands.
Example
In the case of these 34mm - 29mm base to center = on a flat base, maximum scope outer case diameter around 55mm. Fine for our example scope.
These Quick-Release rings fit Weaver & Picatinny rails (Weaver-spec cross bolts fit Picatinny slots). They are not suitable for 11 mm or 13 mm dovetail rails, or proprietary bases such as Tikka or Remington patterns, unless a proper adapter is used.
Please ask if unsure on any aspect of fit and suitability.
Ring Height - 29mm (x2 and minus couple mm for max scope OD clearance on a flat base)
Hawke Precision Steel 34mm 2 Piece Weaver Scope Rings - Low
- Configuration: 2 Piece
- Ring Size (Diameter): 1.3″ / 34mm
- Height: Low
- Rail: Weaver
- Fixings (Rail & Top Cap): Double Torx Screw
- Internal Cushion: NO
- Retractable 'Recoil Stop' Pin: NO
- Height: 53mm / 2.1″
- Weight: 212g / 7.5oz
- Made in China
Hawke Precision Steel 34mm 2 Piece Weaver Scope Rings - Low
- Quick release lever
- Double torx screws to hold your scope firmly in place
- Designed for Weaver Picatinny rail fitting
- Solid steel construction for superior strength
Q: Will these fit Picatinny rails?
Yes — Weaver-spec mounts fit Picatinny rails because Weaver cross bolts are narrower than Picatinny slots. These rings mount securely on both Weaver and Picatinny.
Q: Will these fit 11 mm or 13 mm dovetail rails, or proprietary bases?
No — these are not compatible with 11 mm or 13 mm dovetail rails, or proprietary bases (e.g., Tikka, Remington, CZ patterns) unless an adapter is used. Ask if unsure and we can recommend the correct adapter.
Q: What does “low profile” mean here?
Low profile means the rings hold the scope as close to the rail/base as possible, which can help your cheek weld and sight picture on many rifles. However, always check your scope’s outer objective diameter and the actual ring height in mm to ensure there’s enough clearance.
Q: Should I rely on “low / medium / high” labels?
No — these labels are not standardised between brands. Always use the actual height in mm and compare it to your scope’s outer objective diameter and rail height for clearance.
Q: What size scopes will these rings accommodate?
These rings are designed for standard 34 mm tube scopes. Always ensure your scope tube diameter is 34 mm before choosing this set.
- Hawke Worldwide Warranty
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.