Account login:
Your cart:
0 item(s) in your cart
Total: £0.00

Nikko Steel Lok QD rings

Nikko Steel Lok Quick Detach, Weaver/Picatinny base Mount Rings - extra low height 1"/25mm tube scopes

£28.95
You will earn 28 loyalty points with this purchase

Nikko Steel Lok Quick Release Quick Detach, Weaver/Picatinny base, rifle Scope Mount Rings - extra low height for 1"/25mm tube scopes

Top quality, steel mount rings for 20mm width weaver/picatinny base.

Quick release - Thumb operated quick detach levers for easy removal and re-fitting to original position - no loss of zero

Saddle Height - 0.17" - 4.42mm base to bottom of ring equates to maximum scope outer objective casing diameter of 34mm if on a flat base - Most scope outer casings add 5-12mm to the lens size (depending on things like if it is an AO scope, use of flip up caps etc) so these will fit scopes approximately with lens sizes upto 20-29mm depending on the scope outer case thickness. See Clearance calculation guide below for more info on fitting thresholds.

Nikko call these low profile mounts but we would describe them as extra low height when compared to other mount rings - low are more normally around 8mm saddle height.

Extra low are rings are excellent for getting a very tight to base fit on small objective scopes or for lowering larger scopes fitted on raised bases.

Specification

  • Pair of mount rings supplied
  • Scope Tube Diameter: 1"
  • Mount Rail: Weaver/Picatinny 20mm
  • Mount Type: Two Piece
  • Mount Height: Extra low
  • Finish: Matt Black
  • Solid steel
  • QR quick detach lock and unlock remove and re-fit.

Calculating scope to rifle body clearance

The way you calculate the clearance is by halving the overall OUTSIDE diameter of your rifle scopes objective lens and then deducting half the rifle scopes body tube diameter.

For scopes with a 1" diameter body tube diameter this means deducting 12.7mm.

Note we say OUTSIDE diameter - this means NOT the lens diameter, you need to measure the whole outer casing diameter.

The result gives you the minimum "saddle" dimension - the measure from base of mount to bottom of the ring -
the saddle dimension of these mounts is a very low 4.42mm.

The amount the saddle dimension is greater than the figure you have calculated is the amount of clearance your scopes objective will be clear of your rifles body.

Example -

  1. A Nikko Nighteater 1" 4-16x44 scope has an outer case measurement of 51mm.
  2. 51 divided by 2 = 25.5.
  3. 1" scope so deduct 12.7mm = 12.8mm
  4. So the mount must have a saddle measure (base of mount to bottom of the ring) greater than 12.8mm or else it will ground out on the rifle body.

Calculating your rifle scopes clearance in this way does assume your dovetail or base is not raised above or below your rifles barrel. Note some rifles with high or adjustable cheek pieces may require higher scope mounts or risers so that your eye is in line with the rifle scope and your head is kept in an upright comfortable position.

Own this product? Write a review.
Brand Nikko Stirling
Code NW1257
Weight 0.19kg
MPN NSMQR1WL
EAN 9420001434405