Hawke 1" High Steel Precision Weaver/Picatinny Rifle Scope Mount Rings
- Hex nut model
- Double torx screws to hold your scope firmly in place
- Designed for Weaver/Picatinny rail fitting
- Solid steel construction for superior strength
Hawke 1" High Steel Precision Weaver/Picatinny Rifle Scope Mount Rings
The Hawke 1" Steel Precision Weaver/Picatinny Rifle Scope Mount Rings - High offer a solid steel rifle scope mount from Hawke Optics. These durable mounts will stand the test of time and will not fail you.
Ring Height 27mm = x2 and minus couple mm to get scope objective maximum outer case diameter for clearance on a flat base, therefore: 27x2 = 54 -2 = 52mm - Raised base will obviously affect this.
Are Hgh profile right for you?
High profile positions the scope higher to provide additional clearance for larger objective housings, raised rails, or stepped bases. Always confirm fit using the scope’s outer objective diameter and the ring height in mm to avoid mounting the optic higher than needed.
Key height factors
What matters most is your scope’s outer objective diameter and how it relates to the ring height in millimetres (base-to-bottom or base-to-centre), together with whether your rail/base is flat or raised.
Doing this lets us determine if there will be enough clearance for the objective housing to clear the gun body - and by how much. Do not rely on “low / medium / high” labels. These are not standardised and often lead to buying error.
Example
Take a typical “40mm lens scope” 400mm refers to the lens diameter, not the outer housing. The outer housing is typically ~45–54 mm depending on whether or not the scope has an adjustable objective (AO) housing. AO cases add extra mm.
These mounts measure 27mm base to center. On a flat base, the maximum scope outer case diameter will be 52mm. (27 x 2 = 54. Minus 2mm to give a little space to stop vibration scope-gun body contact) If the gun has a raised base then take this into account as it adds height and may allow use of a lower mount.
In our example, if the base it flat then these mounts are good for a non AO but to short for an AO. A perfect example of why you cannot go on height and lens size alone.
Please ask if unsure on any aspect of fit and suitability.
Hawke 1" High Steel Precision Weaver/Picatinny Rifle Scope Mount Rings
- Configuration: 2 Piece
- Ring Size (Diameter): 1″ / 25.4mm
- Height: High
- Rail: Weaver
- Fixings (Rail & Top Cap): Double Torx Screw
- Internal Cushion: NO
- Retractable 'Recoil Stop' Pin: NO
- Height: 47mm / 1.9″
- Weight: 174g / 2.6oz
- Made in China
Hawke 1" High Steel Precision Weaver/Picatinny Rifle Scope Mount Rings
- Hex nut model
- Double torx screws to hold your scope firmly in place
- Designed for Weaver/Picatinny rail fitting
- Solid steel construction for superior strength
Q: Will these fit Picatinny rails?
Yes — Weaver-spec mounts fit Picatinny rails because Weaver cross bolts are narrower than Picatinny slots. These rings mount securely on both Weaver and Picatinny.
Q: Will these fit 11 mm or 13 mm dovetail rails, or proprietary bases?
No — these are not compatible with 11 mm or 13 mm dovetail rails, or proprietary bases (e.g., Tikka, Remington, CZ patterns) unless an adapter is used. Ask if unsure and we can recommend the correct adapter.
Q: What does “high profile” mean here?
A: High profile positions the scope higher to provide additional clearance for larger objective housings, raised rails, or stepped bases. Always confirm fit using the scope’s outer objective diameter and the ring height in mm to avoid mounting the optic higher than needed.
Q: Should I rely on “low / medium / high” labels?
No — these labels are not standardised between brands. Always use the actual height in mm and compare it to your scope’s outer objective diameter and rail height for clearance.
Q: What size scopes will these rings accommodate?
These rings are designed for standard 1 inch tube scopes. Always ensure your scope tube diameter is 1 inch before choosing this set.
Hawke Worldwide Warranty
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.