Hawke Match Mounts
Hawke Match 1"/25mm HIGH Rifle Scope Mount Rings - 9-11mm Airgun Rimfire base 22102
Hawke Match Rifle Scope Mount Rings - 1"/25mm ring HIGH profile height to fit 9-11mm (3/8") Airgun and Rimfire dovetail base rails - Hawke model code 22102
Sale is for 2 - a pair - of mounts
Precision engineered from high grade aluminium with rounded edges prevent scope damage.
Please read fitting carefully. Mount returns due to choosing the wrong size are WAY too common - cost us both - and are so easily avoidable! If unsure please ask....
Summary - 25mm/1" tube - 9-11mm dovetail base fit (airgun and rimfire type) - HIGH profile height with 22mm saddle to best suit 40-60mm lens scopes.
- Double hex screws to hold your scope firmly in place
- Recoil stop pin
- Reversible dove tail clamp that fits 9-11mm and 3/8 inch airgun and rimfire bases
- Internal cushion tape prevents marking and damage
- High grade aluminium anodised in matte black
- Base: Fits 9-11mm width dovetail bases commonly found on airguns and rimfire. See http://www.tacticalscope.co.uk/blog/?p=50 if unsure how to determine what you have.
- Ring Diameter: 30mm tube scope
- Height: High - Distance from base of mount to bottom of ring (the saddle) is 22mm (0.9")
Scope Lens size suitability - based on scope being fitted onto a flat base rail and scope lens objective being flush to the gun body
- Maximum outer scope case size = 69mm (22mm + 12.5mm ring radius x2)
- This equates to an approx. maximum scope lens size of 60mm as most scope outsides add around 7-12mm.
- Can be more than 7-12mm if flip up lens caps are being used so please take this into consideration.
- However if the end of the scope will hang over the gun barrel or if the rail is raised then larger lens scopes can be accommodated.
- Configuration: 2 Piece
- Ring Size (Diameter): 25mm/1"
- Height: High
- Rail: 9-11mm (3/8"-11mm)
- Fixings (Rail & Top Cap): Double Hex Screw
- Internal Cushion: Yes
- Retractable 'Recoil Stop' Pin: Yes
- Height: 51mm / 2″
- Weight: 102g / 3.6oz