Hawke Precision Steel 1" 2 Piece Weaver QR Steel Scope Rings - Medium
Solid steel quick-release scope mounts for 1" tubes. Fits Weaver and Picatinny rails
- Quick Release Lever
- Double Torx Screws To Hold Your Scope Firmly In Place
- Designed For Weaver/Picatinny Rail Fitting
- Solid Steel Construction For Superior Strength
The Hawke Precision Steel Quick Release Scope Rings are a strong, reliable mounting solution for shooters using 1" (25.4mm) scope tubes on Weaver or Picatinny rails.
Built from solid steel for maximum durability, these medium-height two-piece mounts feature quick-release levers for fast removal and refitting without tools, making them ideal for rifles that regularly switch optics or require easy transport and maintenance
Ring Height 22mm base to ring center
Scope compatibility guidance based on 22mm base to center - please note this is approximate
As a theoretical maximum, a 22mm centre height allows for approximately 44mm objective housing diameter clearance (22mm × 2 = 44mm). In reality, a scope with a 44mm outer diameter would sit directly against the rifle or rail, so a practical absolute maximum would be closer to 43mm.
However, this calculation assumes the objective bell is positioned directly over a flat receiver or rail. On many rifles, the objective extends forward beyond the receiver and sits above the barrel, where additional clearance is often available.
For rifles with a flat receiver and where the objective sits directly above the rail, we would recommend an objective housing diameter of around 32mm maximum for comfortable clearance.
If the objective bell extends beyond the receiver and overhangs the barrel, significantly larger objective housings may be accommodated depending on the rifle and scope combination.
Important:
Always measure the OUTSIDE diameter of the objective housing (objective bell), not the advertised lens size. Two scopes with the same lens size can have very different outer diameters due to wall thickness, adjustable objective mechanisms, illumination systems and overall scope design.
If in doubt, measure your scope's objective housing and compare it with your rifle's available clearance before ordering.
- Configuration: 2 Piece
- Ring Size (Diameter): 25.4mm 1"
- Height: Medium
- Rail: Weaver / Picatinny
- Fixings (Top Cap): Double Torx Screw
- Fixings (Rail): Lever
- Internal Cushion: No
- Retractable 'Recoil Stop' Pin: No
- Height: 41mm 1.7" (total)
- Weight: 138g 4.9oz
- Hawke Worldwide Warranty
- Made in China
- Quick Release Lever
- Double Torx Screws To Hold Your Scope Firmly In Place
- Designed For Weaver/Picatinny Rail Fitting
- Solid Steel Construction For Superior Strength
Q: Will these fit my scope?
A: They fit scopes with a 1" (25.4mm) main tube diameter only.
Q: Will these fit a Picatinny rail?
A: Yes, they are designed for both Picatinny and Weaver rails.
Q: Will these fit a standard 9-11mm airgun dovetail rail?
A: No. These mounts are for Weaver/Picatinny rails. A suitable rail adapter would be required.
Q: Are these quick-release mounts?
A: Yes. They feature lever-operated quick-release clamps for tool-free removal and refitting.
Q: Are they steel or aluminium?
A: These mounts are manufactured from solid steel for increased strength and durability.
Q: What height are they?
A: This is the Medium version, offering more objective bell clearance than low mounts while maintaining a practical sight height.
Q: How many rings are included?
A: One complete pair (2-piece mount set) is included.
Q: Will removing and refitting affect zero?
A: Quick-release mounts are designed to return close to zero when refitted correctly, although checking zero after removal is always recommended.
Q: What size scope objective will these mounts fit?
A: There is no single objective lens size that these mounts are guaranteed to fit. Compatibility depends on the OUTSIDE diameter of the objective housing (bell), not the advertised lens size. With a 22mm base-to-ring centre height, the theoretical maximum objective housing diameter is approximately 44mm, although this would leave little to no clearance. For scopes positioned directly over a flat receiver or rail, we would recommend around maxiumum 43mm outer objective diameter for comfortable clearance. Larger objective housings may fit where the scope extends forward and overhangs the barrel. We recommend measuring your scope's outer objective housing diameter and comparing it to your rifle's available clearance before ordering.
- Hawke Worldwide Warranty
Tactical Scope Shipping Policy
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY – READ MORE: HERE
Note: The above DPD link is to our group partner site Optics Warehouse, with whom we share logistics and stock. Link opens in a new window.
Couriers
We use DPD, Royal Mail, TNT, and UPS courier services for all our UK and international orders. Once your order is dispatched, you will receive an email with your unique tracking number.
In-Store Items
These are items we have in stock and aim to dispatch within 1–2 working days. During busy periods, this may be delayed slightly. If you'd prefer to collect your item in person, please contact us in advance to arrange. Collection orders must be paid for beforehand.
Pre-Order Items
Pre-order items are typically out-of-stock or in limited supply. Purchasing a pre-order secures your item, and it will be dispatched within 24 hours of restock where possible. Check the product page for estimated restock dates. These dates may change, so staying in touch is advised.
International Delivery & Taxes
If your shipping address is outside the UK, you may incur import duties or taxes upon arrival in your country. These charges are your responsibility. Customs regulations vary, so please check with your local customs office. Some packages may be opened for inspection.
Need Help?
If you need assistance, call us at +44 (0)1803 611895 (Optics Warehouse) or email [email protected].
DPD Shipments & PIN Code Delivery
We have now introduced DPD Pin Code verification for all orders shipped via DPD. You will receive a PIN via email and text.
A valid email and mobile number must be provided at checkout. Emails will come from Riviera House 3PL. Please check spam/junk folders if not received.
Failure to present your PIN to the delivery driver will result in a failed delivery and rescheduling may be required.