Is it in stock? If you can add it to cart, yes, in stock. Out of stock cannot be ordered
Free UK Shipping on all orders over £50
Flexible Payment options with Klarna & LayBuy
Need help? Fast Reply Email or call us: 0843 5328462

Hawke Precision Steel

Hawke 34mm MEDIUM QR Lever Steel Weaver/Picatinny Rifle Scope Mount Rings 23031

Hawke 34mm MEDIUM QR Lever Steel Weaver/Picatinny Rifle Scope Mount Rings 23031

£46.95 £39.13 (ex. VAT)
Stock Status: In Stock
You Will Earn 46 points with this purchase

Make 6 weekly payments of £7.83.

Interest free. Learn More

Hawke 34mm diameter ring, MEDIUM profile, Lever Lock Quick Release, pure Precision Steel, Weaver/Picatinny base, Rifle Scope Mount Rings  - 23031
 

Mount Rings Detail

  • Pair - 2 rings supplied
  • Quick release lever
  • Double torx screws top plates to hold your scope firmly in place
  • Designed for Weaver/Picatinny rail fitting
  • Solid steel construction for superior strength


Tech Spec

  • Configuration: 2 Piece
  • Ring Size (Diameter): 34mm / 1.3"
  • Height: Medium
  • Rail: Weaver/Picatinny
  • Fixings (Rail & Top Cap): Double Torx Screw
  • Internal Cushion: NO
  • Retractable 'Recoil Stop' Pin: NO
  • Height: 58mm / 2.3″
  • Weight: 226g / 8oz



34mm Tube -

  • Ring is 34mm diameter.
  • To suit scopes with 34mm diameter tubes.


Medium Profile Height -

  • 17mm base to bottom of ring "Saddle"
  • Gives allowance for approx, maximum scope objective outer diameter of 67mm on a regular weaver/picatinny base.
Calculating scope to rifle body clearance

The way you calculate the clearance is by halving the overall OUTSIDE diameter of your rifle scopes objective lens and then deducting half the rifle scopes body tube diameter.

For scopes with a 34mm diameter body tube diameter this would mean deducting 17mm.

Note we say OUTSIDE diameter - this means NOT the lens diameter, you need to measure the whole outer casing diameter.

The result gives you the minimum "saddle" dimension required - the measure from base of mount to bottom of the ring.

The amount the saddle dimension is greater than the figure you have calculated is the amount of clearance your scopes objective will be clear of your rifles body. 

The saddle on these mounts is
17mm

Example -

  1. A 50mm objective lens scope is measured and found to have an outer case measurement of 60mm.
  2. 60 divided by 2 = 30
  3. 34mm tube scope so deduct 17mm = 13mm
  4. So the mount must have a measure (bottom of mount to bottom of the ring) greater than 13mm or else it will ground out on the rifle body.
So in this example, we have 17mm to use, so have a good clearance of 4mm

Calculating your rifle scopes clearance in this way assumes the base is a regular raised from the gun body picatinny/weaver rail. Some rifles with high or adjustable cheek pieces may require higher scope mounts or risers so that your eye is in line with the rifle scope and your head is kept in an upright comfortable position.

Base fit - Weaver/Picatinny base -

  • For base rails that look like the one pictured below. (Base rail NOT included)
  • 20-22mm wide with horizontal slots.
  • May vary in length and be 2 smaller sections on some rifles.
  • If you do not have a base that looks similar to this, and have for example, an 11mm wide dovetail groove then the mounts can only be made to fit by also purchasing an adapter.
  • Please ask us if unsure.


  • EAN:
    5054492230310
  • MPN:
    23031
  • Height:
    17mm saddle
  • Brand:
    Hawke
  • Product Code:
    NW1912
  • Weight:
    0.27kg
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product